INDe Drum Labs BR3 No-Drill Tom/Accessory Mount Bracket Chrome w/RST

Maximize Your Drum's Resonance with the BR3 Bracket from INDe

The new BR3 Bracket is the most versatile mounting bracket available! It allows you to add one in place of any lug on any drum in your drum set, to either support the drum, or use as an accessory mounting bracket.

No Drilling Required!

Lightweight (.5lb/265g) and low profile (2 Inches/50mm), it provides near-limitless mounting options, without adding weight or making it difficult to fit into cases.

Adjustable mounting holes adjust to replace lugs on nearly any make/model of drums (1"–2" hole spacing, requires 2.75" clearance from other lugs).

Memory lock and mounting screws included.

Upgraded with the INDe RST Bracket

With the RST Bracket, you can easily set up or dismantle your kit in a matter of seconds while preserving the precise positioning from the previous setup!

This bracket replaces the need for wingnuts or key screws to secure each connection point, functioning as a memory lock to preserve positioning when disconnected. The tapered dovetail design guarantees a sturdy connection, while the retainer nub keeps it secure until disassembly is desired.

The RST bracket is specifically made to accommodate rods/legs/L-arms with diameters of 9.5mm and 10.5mm. If needed, it can be adjusted to fit 12.7mm by swapping out the key screws for longer components.

Please note: the RST Bracket is specifically designed to handle a vertical load or force from a single direction, so it may not be suitable for applications such as cymbal arms or other accessory mounts.